saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

A/T - Vibration/Noise Idling in 'DRIVE' Position|Page 6656 > < A/T - Vibration/Noise Idling in 'DRIVE' Position|Page 6654
Page 4
background image

8.

Remove the screw from the front bush on the left-hand side of the subframe.

9.

Check that the bush is correctly fitted. The bushes must be fitted with one opening to the front and one to the rear.

10.

Is the bush correctly fitted in the subframe?

NO: Replace the bush following "WIS - 7. Suspension, wheels - Suspension, front - Adjust, replace - Bush, subframe". At the same time, check
and if necessary replace the front bush on the right-hand side. Then continue following step 11 of these instructions.

YES: Continue following step 11 of these instructions.

A/T - Vibration/Noise Idling in 'DRIVE' Position|Page 6656 > < A/T - Vibration/Noise Idling in 'DRIVE' Position|Page 6654