9-5 Linear Sport Wagon (9600) L4-2.3L Turbo (B235) (2002)
Clutch Slave Cylinder: Service and Repair
Slave Cylinder
Slave cylinder
To remove
1. Remove the gearbox.
2. Detach the delivery pipe.
3. Remove the slave cylinder's three retaining screws and withdraw the slave cylinder.
To fit
1. Apply Loctite 577 Part No. 74 96 284 to the retaining screws.
2. Screw the slave cylinder in place.
Tightening torque 10 Nm (7 ft. lbs.)
3. Fit the delivery pipe to the slave cylinder.
Tightening torque 22 Nm (16 ft. lbs.)