9-5 Linear Sport Wagon (9600) L4-2.3L Turbo (B235) (2002)
/l4-2.3l_turbo_(b235)/Page-1496001.png)
Seals and Gaskets: Service and Repair
Seal Ring-Selector Rod, Removed Gearbox
Seal Ring - Selector Rod, Removed Gearbox
To Remove
1. Prise out the seal using a narrow screwdriver.
IMPORTANT: Do not damage the sealing surface on the selector rod.
To Fit
1. Clean the selector rod and check that it has no burrs.
2. Wind a layer of thin, smooth plastic tape around the hole in the selector rod.
3. Remove the tape and tap in the seal with assembly tool 87 90 685 - and clamp 87 91 709 of. Only tap so far that the seal is flush with the clutch
housing.
