9-5 SE Sedan (9600) V6-3.0L Turbo (B308) (1999)
^
Read status: washer fluid level sensor.
^
The tester should show status: ON.
Test results OK?
YES
^
Replace: Washer level switch.
^
Go to point 4.
NO
^
Repair or replace the lead between pin B of the female connector and pin 6 of the control module.
^
Go to point 4.
4. Final check
^
Clear the diagnostic trouble codes in all systems.
^
Carry out a function check.
Test results OK?
YES
^
The steps taken to rectify the fault were correct.
NO
^
See "Before changing a control module." See: Fault Diagnosis, General/Before Changing A Control Module