9-5 SE Sedan (9600) V6-3.0L Turbo (B308) (1999)
/v6-3.0l_turbo_(b308)/Page-2896002.png)
5. Unbolt the anti-roll bar from the longitudinal link on both sides of the car.
6. Remove the subframe retaining bolts and lower the subframe complete with anti-roll bar and transverse links.
7. Remove the anti-roll bar and transverse links.
WARNING The transverse link retaining bolts with protective sleeves must be refitted in the same way as they were when removed. Then
( protect the fuel tank and fuel filler pipe in the event of a collision.
To fit
1. Bolt the anti-roll bar to the subframe.
Tightening torque 50 Nm (40 ft. lbs.).
2. Mount the transverse links on the subframe but do not tighten the bolts. Fit new nuts.
WARNING The transverse link retaining bolts with protective sleeves must be refitted in the same way as they were when removed. Then
( protect the fuel tank and fuel filler pipe in the event of a collision.
