saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Keyless Entry Receiver|Locations|Page 10138 > < Keyless Entry Receiver|Locations|Page 10136
Page 1
background image

Keyless Entry Receiver: Description and Operation

Receiver For Remote Control

The receiver for the remote control has an integral loop antenna and is available in two variants for frequencies 433.92 MHz and 315 MHz. Located
between the front seats in the rear of the centre console, this is supplied with +30 circuit from fuse 9 and connected to the TWICE control module at the
following pins:

Ground

Pin 13

Signal

Pin 14

Function

The receiver's integral loop antenna receives the code signal sent out by the remote control. The signal is processed and sent on to TWICE which is
programmed to identify the remote controls programmed into the car. If the signal received is correct, the command is performed.

Keyless Entry Receiver|Locations|Page 10138 > < Keyless Entry Receiver|Locations|Page 10136