9-5 SE Sedan (9600) V6-3.0L Turbo (B308) (1999)
Trunk / Liftgate Lock Cylinder: Service and Repair
Tailgate Lock Cylinder, 5D
To remove
1
Open the tailgate.
2
Remove the frame around the inner door handle by prising with a screwdriver in the three recesses. Once the frame clips have been released, pull
the frame down and bend it out.
3
Remove the inner tailgate trim by removing the door pull retaining screws and the plastic clips in the trim.
4
Lift off the tailgate trim as described below:
a
Pull down the top of the trim to release it from the clips.
b
Pull back on the trim to release the guide pin, taking care not to break it.
5
Unscrew the nuts and unhook the lock rod from the driver.
6
Remove the lock cylinder. Unplug the connector.