9-5 SE Sedan (9600) V6-3.0L Turbo (B308) (1999)
/v6-3.0l_turbo_(b308)/Page-1953002.png)
4. Hook the cable in place and fit the return spring.
5. Adjust the handbrake, refer to Adjustment.
6. Fit the rear wheels and tighten the wheel bolts, using a torque wrench.
Tightening torque 110 Nm (80 ft. lbs.).
IMPORTANT: The wheel must hang freely when the wheel bolts are being tightened.
7. Lower the car to the floor and depress the brake pedal to force out the brake pistons.
8. Adjust the brake fluid level.
9. Drive the car on test and check the operation of the brakes.
