9-5 SE Sedan (9600) V6-3.0L Turbo (B308) (1999)
Radiator Cooling Fan Motor: Service and Repair
Radiator Fan
Radiator fan
WARNING Do not touch the fan before unplugging the fan connectors.
To remove
1. Remove the upper engine cover.
2. Remove the bypass pipe and valve. Undo the vacuum hose on the turbo bypass valve.
NOTE There is an O-ring at the bypass pipe's attachment to the turbo intake pipe.
3. Unplug the connector from the temperature /pressure sensor on the charge air pipe.
4. Undo the charge air pipe from the throttle body, raise the car.
5. Detach the charge air pipe from the charge air cooler leaving the clip to hang on the cooler.
6. Lower the car and remove the charge air pipe.