9-5 SE Sedan (9600) V6-3.0L Turbo (B308) (1999)
/v6-3.0l_turbo_(b308)/Page-867008.png)
31. Undo the nuts securing the front exhaust manifold.
32. Remove the front exhaust manifold with turbo.
To fit
IMPORTANT The oxygen sensor cable must not be of twisted type. Twisted cables exposed to vibration can break. The oxygen sensor is sensitive
to impacts and jolting and must be handled with care.
NOTE
-
Smear the studs and gaskets sparingly with Molycote 1000, part. no. 3020971 or similar, to prevent them baking on.
-
Spray the connector with Kontakt 61, part no. 3004520, before plugging it in.
1. Clean the sealing surfaces and fit a new gasket to the front exhaust manifold.
