9-5 SE Sedan (9600) V6-3.0L Turbo (B308) (1999)
4. Fill up with coolant. Close the filler cap.
5. Start the heater first and then the engine. Run them simultaneously until all air has been expelled from the system.
6. Check the coolant level and coolant freezing point. Top up as necessary.
Parking Heater
Parking Heater
To remove
1. Undo the expansion tank filler cap.
2. Raise the car.
3. Remove the left-hand front wheel.
4. Remove the left-hand front wing liner.
5. Remove the splash guard.
6. Remove the fog lights, if fitted.