9-5 SE Sedan (9600) V6-3.0L Turbo (B308) (1999)
/v6-3.0l_turbo_(b308)/Page-667001.png)
Wheels: Testing and Inspection
Checking the wheels
Pressed steel wheels
On a correctly fitted wheel, radial runout A (out-of-round) must not exceed 0.6 mm. Runout B must not exceed 0.8 mm.
Light alloy wheels
On a correctly fitted wheel, radial runout (out-of-round) must not exceed 0.5 mm. Runout B must not exceed 0.5 mm.
IMPORTANT To avoid damage to the wheels during balancing, shims or spacers should be used as protection.
