9-5 SE Sedan (9600) V6-3.0L Turbo (B308) (1999)
/v6-3.0l_turbo_(b308)/Page-1421001.png)
Ignition Discharge Module: Service and Repair
Ignition Discharge Module, Front
Ignition discharge module, front
To remove
1. Remove the engine cover.
2. Remove the ignition discharge module.
3. Unplug the ignition discharge module connector.
To fit
1. Coat the rubber seals with Krytox (part No.30 19 312).
2. Spray the connector with Kontakt 61 contact cleaner (part no.30 04 520). Plug in the connector.
3. Fit the ignition discharge module.
4. Fit the cover.
