9-5 SE Sedan (9600) V6-3.0L Turbo (B308) (1999)
Seat Belt: Service and Repair
Rear Center Belt
Rear Center Belt
To remove
1. Fold down the backrest.
2. Remove the head restraint from the seat.
3. Remove the speaker grilles on both sides.
4. Remove the clips at the front of the parcel shelf, 3 x.
5. Lift out the parcel shelf trim and pull out the center belt.
6. Unscrew the lower belt fixing, 1 nut.
7. Remove the center belt from the parcel shelf, 1 nut.
To fit
IMPORTANT: Ensure that the belt runs correctly.
Fit in reverse order.
Check that the center belt runs in front of the locating pin and backrest.
Tightening torques:
Inertia reel mounting nuts 45 Nm (33 ft. lbs.).
Floor mounting 45 Nm (33 ft. lbs.)