9-5 SE Sedan (9600) V6-3.0L Turbo (B308) (1999)
Alignment: Service and Repair
Wheel Alignment
Overview
Before checking the wheel geometry, the height of the car must be measured. See Measuring car height before checking wheel geometry.
1. Connect equipment for 4-wheel alignment and follow the description for the relevant equipment.
2. Check rear wheel geometry according to tables, refer to Specifications, Mechanical, and adjust as necessary.
3. Check front wheel geometry according to tables, refer to Specifications, Mechanical and adjust as necessary.
Adjusting rear toe angle
1. Use a 4-column lift to raise the car so that the wheels are under pressure.
2. Fasten the longitudinal links with Fixture 89 96 795
3. Slightly undo the bolts to the body bracket of one of the longitudinal links.