9-5 SE Sedan (9600) V6-3.0L Turbo (B308) (1999)
2.
Remove the scuff plates on both sides. Start by lifting the rear edge.
3.
Remove the two outer seat belt mountings and left hand seat belt buckle.
4.
Undo the clips securing the rear edge of the carpet. Use special tool no. 84 71 179.
5.
Fold forward the carpet.
Note:
Fold along the line of the seat hinges.
6.
Lay out the damper mat and press down at the hinges. Lay the mat under the luggage compartment carpet.
WARNING:
It is essential that the hooks for the anti-submarining protection protrude from the punched holes in the mat as they must grip the seat cushions in the
event of a collision.