9-5 SE Sedan (9600) V6-3.0L Turbo (B308) (1999)
/v6-3.0l_turbo_(b308)/Page-1723004.png)
2. Fit the circlip with the opening pointing downwards.
3. Press on the hub using tool 8996704 (KM-500-3 and KM-500-5).
4. Fit the drive shaft in the hub and push it home with a new hub centre-nut.
IMPORTANT A new hub centre-nut should always be fitted if it has been removed since the clamping force of the lock embossing will be
reduced if refitted.
5. Fit the holder for the ABS sensor and disc back-plates.
