9-5 SE Sedan (9600) V6-3.0L Turbo (B308) (1999)
/v6-3.0l_turbo_(b308)/Page-1806007.png)
b
Fit the solenoid's two screws. See point 2.
o
Fit the two parts of the selector lever housing together.
d
Connect the solenoid leads.
e
Reinstall the cable ties.
5
Fit the selector lever housing.
a
Fit the selector lever housing in place. See point 1.
b
Connect the cable to the selector lever housing and fit the clamp. See point 2.
c
Plug the connector into the ignition switch and fit the selector lever housing in place at the same time.
d
Plug in the selector lever housing's connector and refit the 2 cable ties on the wiring harness.
