9-5 SE Sedan (9600) V6-3.0L Turbo (B308) (1999)
/v6-3.0l_turbo_(b308)/Page-3591003.png)
15. Remove the cut guide pins and cut away the adhesive that is pressed down into the guide pin flanges.
IMPORTANT
Remove the adhesive by that locating stud flanges to ensure the correct height of the windscreen when it is fitted.
IMPORTANT
Betamate E 2400 hardens in 2 hours at 23 °C and 50 % relative humidity. To avoid the windscreen coming loose or its position changing during the
curing time, the car must not be subjected to force. Doors, tailgate and bonnet must not be shut. The car must not be rocked or rolled. During the time the
adhesive is curing there must be no strain on the windscreen either.
To fit
When gluing windows, use 30 05 600 Adhesive kit and 30 18 702 Primer (for painted surfaces). To avoid confusion when cleaning and priming, the lids
of the cans have different colours:
30 18 702 Primer, Betaprime 5402 (for painted
Red lid
surfaces on which the old bead of adhesive is
completely removed from the body)
Glass activator Betawipe 04604 (cleaning)
Yellow lid
Glass primer Betaprime 5001
Green lid
