saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Procedures|Page 8670 > < Procedures
Page 2
background image

NOTE:  Check that the sunroof hatch is properly closed. The wires' slide mountings should be centered between the marks on the slide rail.

The hatch must be closed when the new motor is fitted, as the motor is delivered in the closed position.

7. Work is made easier by first removing the sun visors. It is then easier to bend down the headlining without damaging it.

Unplug the mirror light connector.

8. Remove the lamp glass by inserting a screw driver into the clip recesses in the front edge and carefully prising it out.

NOTE:  Proceed with great care, as the glass could easily crack if removed incorrectly.
Be careful not to scratch the cover.

Procedures|Page 8670 > < Procedures