9-5 SE Wagon (9600) V6-3.0L Turbo (B308) (2001)
12. Fit the lower seat cowl, 2 screws.
13. On electrically adjustable front seats, first plug in the connector to the switch and to the memory buttons, if any, on the upper seat cowl.
Refit the upper seat cowl by slipping this into the track provided and pressing the cowl down at the back.
Fasten the seat cowl, 3 screws and 2 covers.
IMPORTANT
Electrically adjustable seat: Fit the protection on the front bolt.
14. Manual front seat:
Mount the height adjustment lever and backrest adjustment knob.
NOTE: If required, removing the backrest upholstery can make it easier to position the backrest rake axle. Check that the backrest upholstery is not
pinched between the cowl and the backrest. The upholstery should lie over the axle.
15. Fit the front seat.