9-5 SE Wagon (9600) V6-3.0L Turbo (B308) (2001)
14. Turn the crankshaft in the direction of engine rotation until just before the zero mark. The grooves on the camshaft sprockets should be just in
front of the marks on the inner (rear) timing cover.
Important: The crankshaft should always be carefully turned in the direction of engine rotation - never against the direction of engine rotation.
15. Fit locking tool KM-800-10 on the crankshaft. Carefully turn the crankshaft in the direction of engine rotation until the arm abuts against the
coolant pump flange and tighten it.
Note: The camshaft sprockets for cylinders 1-3-5 have the numbers 1 and 2 and the camshaft sprockets for cylinders 2-4-6 have the numbers 3
and 4. These numbers are right next to the groove markings.