9-5 SE Wagon (9600) V6-3.0L Turbo (B308) (2001)
3. Change O-ring and fit the glow plug holder with filter.
4. Refit the fork.
5. Change the O-ring and fit the glow plug.
6. Connect the cables to the glow plug and tighten the nut.
NOTE: Check that the insulation on the glow plug cables is undamaged.
7. Fit the flame temperature sensor.
8. Fit the flame temperature sensor's leads in connector B2.
NOTE: Pay attention to the location of the pins when fitting them in the connector.