9-5 SE Wagon (9600) V6-3.0L Turbo (B308) (2001)
/v6-3.0l_turbo_(b308)/Page-1806005.png)
9. Remove the rubber seals from the wiper spindles.
10. Remove the rubber moulding along the edge of the bulkhead and loosen the clips on one side. Place the rubber moulding on one side.
11. Loosen the cover over the bulkhead partition space (fastened with clips) by lifting it carefully forwards so that it is released from the windscreen.
Hold the wire to the bonnet release to one side and lift the cover backwards towards the windscreen.
12. Loosen the clips holding the front edge of the water shield with a screwdriver. Lift off the water shield.
