saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

System Overview|Page 5791 > < System Overview|Page 5789
Page 5
background image

When air recirculation is switched on, the system is set as follows:

^

air recirculation on

^

button symbols appear on the display

This button switches on and off the heated rear window. Rear window heating cannot be switched on manually until the engine has been started.

The length of time the heating is on is determined by the outside temperature. At +5 degrees C it is 5 minutes and at lower temperatures the time is
increased to max 10 minutes when the outside temperature is lower than -10 degrees C.

If automatic rear window heating is selected with extended user-programming, the maximum time is 5 instead of 10 minutes.

The function can be user-programmed as soon as a manual selection has been made.

When rear window heating is switched on, the system is set as follows:

^

electrically heated rear window on

^

button symbols appear on the display

These button increase or decrease the current to the fan. If a button is held down, the current will be changed continuously. To return to automatic the
AUTO button must be pressed.

Fan speed is shown with symbols on the ACC unit display. AUTO goes out when fan speed is selected manually. If fan speed 0 is selected, the A/C will
be disengaged and ECON displayed.

ECON

System Overview|Page 5791 > < System Overview|Page 5789