9-5 SE Wagon (9600) V6-3.0L Turbo (B308) (2001)
Evaporator Temperature Sensor / Switch: Service and Repair
Evaporator Temperature Sensor
To remove
1
Remove the glove box.
Remove the trim from the side of the center console.
2
Cut the cable tie holding the wire harness to the service cover. Also cut the cable tie holding the cooler hose to the glove box.
Remove the service cover.
3
Remove the fresh-air filter.
4
Put a hand into the filter holder and carefully pull out the temperature sensor from the evaporated.
5
Separate the connector and detach contact from the plate.
Lift up the plate and unplug the contact.
To fit