9-5 SE Wagon (9600) V6-3.0L Turbo (B308) (2001)
9. Clamp the hoses connected to the expansion tank using pinch-off pliers.
10. Tilt the expansion tank forwards and drain the coolant into a suitable receptacle.
11. Undo the hose clips on the hoses.
12. Lift out the expansion tank.
To fit
NOTE: Spray the connector with Kontakt61, part no. 30 04 520.
1. Fit in reverse order.
2. Fill with coolant
3. Start the engine and run it with the heater controls on full.
4. Check the coolant level and freezing point. If necessary, top up with more coolant.
5. Raise the car.
6. Fit the lower front cover.
Horn Relay
Horn Relay
To replace
1. Open the lid of the main fuse box in the engine bay.