9-5 SE Wagon (9600) V6-3.0L Turbo (B308) (2001)
Hose/Line HVAC: Service and Repair
Evaporator High-Pressure Pipe
Evaporator High-Pressure Pipe (V6)
To remove
The evaporator's high-pressure pipe consists of two pipes running from the receiver via a joint by the console behind the right-hand headlamp to the
expansion valve.
1. Place the car on a lift.
2. Drain the refrigerant from the A/C system.
3. Detach the inlet hose with mass air flow sensor, without unplugging the connector, and place it on one side.