9-5 SE Wagon (9600) V6-3.0L Turbo (B308) (2001)
6. Loosen the pipe from the holders on the subframe and remove it.
NOTE: Make a note of how the pipe is positioned before removing it.
7. Loosen and push aside the power-steering oil container.
8. Detach the rear end of the high-pressure pipe from the expansion valve.
Plug the openings.
9. Loosen the high-pressure pipe from the holders on the structure.
10. Carefully lift out the high-pressure pipe.
To fit
1. Position the rear end of the high-pressure pipe.
2. Remove the plugs and lubricate the O-rings on the high-pressure pipe.
3. Connect the high-pressure pipe to the expansion valve.
Tightening torque: 8 Nm (5.9 ft. lbs.)
4. Fit the power-steering oil container.