9-5 SE Wagon (9600) V6-3.0L Turbo (B308) (2001)
/v6-3.0l_turbo_(b308)/Page-925001.png)
Oxygen Sensor: Service and Repair
Rear Oxygen Sensor
Preheated Oxygen Sensor 2, OBDII
To remove
WARNING
Warm components:
1. Unplug the connector.
2. Remove the oxygen sensor connector from the holder.
3. Cut the oxygen sensor cable fastening.
4. Raise the car.
5. Check the run of the cable and then lead the cable down.
