9-5 SE Wagon (9600) V6-3.0L Turbo (B308) (2001)
/v6-3.0l_turbo_(b308)/Page-1997010.png)
1. Ignition switch in the OFF position.
2. Slide the seat forwards as far as it will go
3. Unscrew the seat at the rear, 2 screws.
4. Slide the seat backwards and undo the front 2 bolts.
5. Tip the seat rearwards, snip the cable tie and unplug the 29-pin connection under the seat. Detach the straps between the cable and pullmaflex net.
6. Remove the belt, if fitted, from the seat.
7. Lift the seat out of the car.
8. Detach the straps securing the backrest upholstery fabric at the bottom.
