9-5 SE Wagon (9600) V6-3.0L Turbo (B308) (2001)
1. Ignition switch in the OFF position.
2. Slide the seat forwards as far as it will go
3. Unscrew the seat at the rear, 2 screws.
4. Slide the seat rearwards and undo the 2 screws at the front.
5. Tilt the seat rearwards, cut the cable tie and unplug the 29-pin connector under the seat.
6. Remove the covers from the seat rail.
7. Lift the seat out of the car.
8. Detach the lower edge of the backrest upholstery fabric.