9-5 SE Wagon (9600) V6-3.0L Turbo (B308) (2001)
Power Steering Pump: Service and Repair
Belt Pulley on Power Steering Pump
Belt Pulley On Power Steering Pump, V6-Engine
To remove
1. Remove the mass air flow sensor with hose.
2. Detach the power steering servo hose from the holder.
3. Undo the belt pulley bolts slightly.
4. Take the strain off the multigroove V-belt and lift it off the servo pump pulley.
5. Remove the belt pulley.
To fit
1. Fit the belt pulley.
Tightening torque 20 Nm (15 ft. lbs.) + (30°).
2. Take the strain off the belt tensioner and fit the belt. Ensure the belt is fitted correctly on all the belt pulleys.