9-5 SE Wagon (9600) V6-3.0L Turbo (B308) (2001)
1. Lubricate the surface of the steering swivel member bearing with Molycote Rapid G and press in a new bearing with Drift-front-wheel bearings 89
96 704 (KM-500-4 and KM-500-S).
2. Fit the circlip with the opening facing downwards.
3. Press in the hub using Drift, front-wheel bearings 89 96 704 (KM-500-3 and KM-500
4. Fit the drive shaft in the hub and pull it in with a new hub centre-nut.
Important: Always fit a new hub-centre nut if it has been removed because the clamping force of the lock indentations will be reduced if the old
one is refitted.
Use a nut with top groove.