9-5 SE Wagon (9600) V6-3.0L Turbo (B308) (2001)
1. Screw in the track-rod end the same number of turns as when it was removed, but do not tighten the locknut.
2. Bolt the track-rod end to the steering swivel member.
Tightening torque 60 Nm (45 ft. lbs.)
3. Fit the wheel,
Tightening torque 110 Nm (81 ft. lbs.)
Lower the car to the floor.
4. Check the toe-in and adjust if required; Alignment.
5. Tighten the track rod's locknut.
Tightening torque 70 Nm (55 ft. lbs.)