9-5 SE Wagon (9600) V6-3.0L Turbo (B308) (2001)
Rear Cross-Member: Service and Repair
Subframe
To remove
1. Raise the car and remove the rear wheels.
2. Unhook the exhaust system's rear and centre rubber hangers. Hang up the exhaust system so that it does not put too much of a strain on the front
rubber hangers and flexible section.
3. Unbolt the lower transverse link from the longitudinal link on both sides of the car.
4. Unbolt the upper transverse link from the longitudinal link on both sides of the car.