saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Fault Diagnosis By Fault Symptoms|Page 8792 > < Fault Diagnosis By Fault Symptoms|Page 8790
Page 25
background image

^

Connect a jumper lead between pins 1 and 3 of the male connector.
Reading: Steering Wheel Control

The reading should be 0 V - 0.35 V

Checking the wiring harness

Jiggle the leads and in-line connectors at several places and in different directions to reveal intermittent breaks and short circuits in the wiring harness.
Observe the multimeter, test lamp or diagnostic tool while doing this.

Is the function correct?

NO

^

See: Horn Failure / Steering Wheel Controls Partly Inoperative/Rectifying the Lead - IV 

YES ^

See: Horn Failure / Steering Wheel Controls Partly Inoperative/Changing Components - II 

Checking the Fault Symptoms

Checking The Fault Symptoms

What function is not OK?

Fault Diagnosis By Fault Symptoms|Page 8792 > < Fault Diagnosis By Fault Symptoms|Page 8790