saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Hood Latch Release|Service and Repair|Page 10315 > < Hood Latch Release|Service and Repair
Page 2
background image

5. Remove the rubber seals from the wiper spindles.
6. Remove the rear bonnet seal.
7. Unscrew the cover over the bulkhead partition space. Remove the cover by raising the front and pulling it forwards to release the clips from the

edge of the windscreen and then lifting it backwards.

8. Remove the lower panel section on the driver's side.

Hood Latch Release|Service and Repair|Page 10315 > < Hood Latch Release|Service and Repair