saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Power Seat Motor Position Sensor|Locations|Page 11342 > < Power Seat Motor Position Sensor|Locations|Page 11340
Page 2
background image

1

Take the front seat out of the car. 

2

Undo the straps holding the backrest upholstery at the bottom.
Undo the cables and cable ties. Extract the cables from the hole.

3

Release the upholstery strips on the underside.

4

Pull out the sheet from the backrest upholstery.

5

Undo the rear of the backrest upholstery by releasing the upholstery strips along the sides and folding back the upholstery.

6

Release the upholstery strips along one side at the rear of the backrest frame.

7

Remove the knob for the lumbar support adjustment.

8

Detach the upholstery hooks in the underside of the backrest

9

Fold aside the upholstery and cushion at the side of the backrest.

10

Unscrew the motor for the backrest adjustment, 2 screws.

11

Lift the motor off the gear wheel.

12

Unplug the connector for the backrest adjustment motor

To fit

Power Seat Motor Position Sensor|Locations|Page 11342 > < Power Seat Motor Position Sensor|Locations|Page 11340