9-5 Sedan (9600) L4-2.3L Turbo (B235) (2000)
1
Remove the backrest from the car.
2
Remove the hinge plates, 2 x for the 40% backrest and 1 x for the 60% backrest.
3
Release the upholstery strips along the edge and around the catches. On the 60% backrest, release the upholstery strips around the load hatch.
4
Detach the foam cushion reinforcing plate from the back plate and lift it out.
5
Cut the staples securing the seat upholstery to the foam cushion.
6
Remove the seat upholstery.
To fit
1
Fit the upholstery to the backrest loam cushion.
2
Fit the staples using the pliers in fitting kit 84 71 062.
3
Roll the upholstery over the edges of the foam cushion and turn it over.
4
Lay the back plate in place and fit the catches.