9-5 Sedan (9600) L4-2.3L Turbo (B235) (2000)
13
Fit the head restraint sleeves by inserting them halt a revolution from their final position. Press down the sleeves about half way turn them half a
revolution. Guide the sleeves into the back plate and press them home.
14
Fit the head restraint by depressing the catch and pressing it home. Take care to keep the legs of the head restraint parallel with each other.
Make sure the lock is functioning.
15
Fit the upholstery on the rear of the backrest. Slide the angled edge in place and press on all the clips at the rear.
16
Fit the plastic cover on the backrest catch by pressing it on while the catch is open/unlocked (1 screw and a bayonet clip under the handle). Check
its function.