saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Auxiliary Water Pump > < Combustion Air Fan|Page 7265
Page 62
background image

6. Plug in the connector.
7. Fit the bolts on the side of the bracket.
8. Fit the exhaust pipe and intake hose.
9. Refit the fog lights, if any.

10. Refit the splash guard.
11. Lower the car to the floor.
12. Fill up with coolant. Close the filler cap.
13. Start the engine, activate the heater and warm it up.
14. Check the coolant level and coolant freezing point. Top up as necessary.

Auxiliary Water Pump > < Combustion Air Fan|Page 7265