saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Fault Diagnosis By Fault Symptoms|Page 12001 > < Fault Diagnosis By Fault Symptoms|Page 11999
Page 23
background image

^

Connect a test lamp to B+ and pin 3 of the male connector.

^

The test lamp should light.

Checking the wiring harness

Jiggle the leads and in-line connectors at several places and in different directions to reveal intermittent breaks and short circuits in the wiring harness.
Observe the multimeter, test lamp or diagnostic tool while doing this.

Is the function correct?

NO

^

See: Horn Failure / Steering Wheel Controls Partly Inoperative/Rectifying the Lead - I 

YES ^

See: Horn Failure / Steering Wheel Controls Partly Inoperative/Checking the Control Module's Sensor Input 

Checking the Control Module's Sensor Input

Checking The Control Module's Sensor Input

^

Contact SID.

^

Turn the ignition switch to the ON position.
Reading: Steering Wheel Control

Fault Diagnosis By Fault Symptoms|Page 12001 > < Fault Diagnosis By Fault Symptoms|Page 11999