saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Campaign - Deactivation Of Analog OnStar(R)|Page 43 > < Campaign - Deactivation Of Analog OnStar(R)|Page 41
Page 32
background image

1.

Remove the ground cable from the battery's negative cable.

2.

Remove the center console, see WIS - Body - Interior.

3.

Loosen the gear shift housing (A).

AUT: Disconnect the 6-pin connector (B) to improve access to the gear shift housing screws.

4.

Disconnect the signal cable from the SRS control module to the OnStar(R) control module and secure the cable.

4.1.

Disconnect the connector (A) from the SRS control module and cut the cable tie (B).

Campaign - Deactivation Of Analog OnStar(R)|Page 43 > < Campaign - Deactivation Of Analog OnStar(R)|Page 41