saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Rear Belt, 4D|Page 8311 > < Rear Belt, 4D|Page 8309
Page 16
background image

5. Thread the belt and guide into the C-pillar trim, push the seatbelt guide into position on the C-pillar trim.
6. Position the C pillar trim by means of the locating pin and press the trim into place.

NOTE:  Use new nuts.

7. Fit the lower belt anchorage point, check that the guide pin is located correctly.

Tightening torque: 45 Nm (33 lbf ft)

8. Lift the side trim into place and plug in any connector to the CD player.

Rear Belt, 4D|Page 8311 > < Rear Belt, 4D|Page 8309