9-5 Sedan (9600) L4-2.3L Turbo (B235) (2000)
/l4-2.3l_turbo_(b235)/Page-2454021.png)
1. Remove the C-pillar trim (fastened with clips).
2. Undo the bottom seat-belt mounting and remove the belt guide form the C-pillar trim.
Draw the belt through the C-pillar trim.
3. Remove the upper belt mounting from the C-pillar, 2 nuts.
To fit
IMPORTANT:
^
Ensure that the belt runs correctly.
^
Check that the door seals fit correctly.
Fit in reverse order.
Tightening torques:
Inertia reel mounting nuts 45 Nm (33 ft. lbs.).
Floor mounting 45 Nm (33 ft. lbs.).
Rear Center Belt
Rear Center Belt
To remove
