9-5 Sedan (9600) L4-2.3L Turbo (B235) (2000)
/l4-2.3l_turbo_(b235)/Page-2483005.png)
4. Fasten the belt to the seat.
5. Fit the B-pillar trim.
Make sure that carpets and scuff plates come inside the B-pillar trim.
6. Fit the door sealing mouldings round the B-pillar.
7. Then check the following with the diagnostic tool:
Connect the diagnostic tool to the diagnostic socket under the dashboard. Delete any trouble codes.
Switch off the ignition and switch it on again. Wait at least 10 minutes with the ignition switched on.
Check whether a diagnostic trouble code (DTC) is displayed:
If a diagnostic trouble code is displayed:
Carry out fault diagnosis in accordance with the directions given for each DTC.
If no diagnostic trouble code is displayed:
Fitting completed correctly. Disconnect the diagnostic tool.
