9-5 Sedan (9600) L4-2.3L Turbo (B235) (2000)
/l4-2.3l_turbo_(b235)/Page-1914001.png)
Ignition Switch Lock Cylinder: Service and Repair
Manual Transaxle
To Remove
1. Remove the key sensor. Turn the antenna unit slightly clockwise and lift it up.
2. Turn the ignition switch to the OFF position.
3. Bend a welding rod.
4. Press in the catch in the lock cylinder using the welding rod and lift the lock cylinder straight up. The key must be in the lock cylinder.
To Fit
1. Turn the key to the OFF position.
2. Position the lock cylinder. Push it fully down and make sure that it is secure.
3. Fit the key sensor.
