9-5 Sedan (9600) L4-2.3L Turbo (B235) (2000)
/l4-2.3l_turbo_(b235)/Page-2006001.png)
Steering Swivel: Service and Repair
Steering swivel member
To remove
IMPORTANT: The bearing will be rendered unserviceable on dismantling.
1. Slacken the hub center nut when the car is standing on all four wheels.
2. Raise the car. If a jack is used, safety stands should be placed under the car.
3. Remove the wheel.
4. Completely undo the hub center-nut. The nut must not be reused
5. Press back the brake piston using a pair of slip-joint pliers. Remove the brake caliper from the swivel member and suspend it from the coil spring
with a piece of wire or cable tie, etc.
6. Undo the brake disc retaining bolt and remove the disc.
7. Undo the ABS sensor retaining bolt and lift up the sensor.
