saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Front Cross-Member|Specifications|Page 6802 > < Front Cross-Member|Specifications|Page 6800
Page 6
background image

16. Tighten the air cleaner retaining nuts.
17. Raise the front exhaust pipe section and close the joint between the catalytic converter and silencer and also the connection the turbocharger. Refit

the catalytic converter's temperature sensor, if previously removed (and if the car is equipped with same).
Tightening torque 25 Nm (20 ft. lbs.). 

18. Refit the air deflector.
19. Refit the wheels.

Tightening torque 120 Nm (90 ft. lbs.). 
Lower the car to the floor.

20. Remove the lifting beam and tighten the bolts securing the rear engine cushion to the subframe.

Tightening torque 25 Nm (20 ft. lbs.)

Front Cross-Member|Specifications|Page 6802 > < Front Cross-Member|Specifications|Page 6800